小型锤式粉碎机
一、中药粉碎机技术参数：
|
型号
|
电机功率
（kw）
|
转速
（r/min）
|
电压
（v）
|
细度
（目）
|
产量
kg/h
|
重量
(kg)
|
体积（mm）
|
|
AK-A
|
1.5
|
2840
|
220
|
50-200
|
1-15
|
25
|
500×170×550
|
|
AK-B
|
2.2
|
2840
|
220
|
60-200
|
3-30
|
30
|
500×250×850
|
Traditional Chinese medicine pulverizer matters needing attention:
1, check whether there is a foreign body ( a crushing cavity before starting the machine must be empty ),switch on the power supply.
2, tighten the upper cover and the crushing cavity of the butterfly nut.
3, start the motor, air machine rotating 1-2 minutes, and then from the feed plate gradually feeding playmaterials, feeding should not be too much too fast.
4, if the material is jammed, the motor does not rotate, immediately shut off, to avoid motor burned, thusto be cleared after material, may continue to use.
In 5, the machine in the process of using forbidden open the cover and use his hand into the crushing chamber.
In 6, this machine is a dry mill, not break the wet and greasy.
7, please user according to the changing of different screen.
In 8, the machine adopts the overheat protection device, such as a motor load is too large, the machine will stop automatically, such as to continue, please press the protector.
In 9, the engine working process, the current greater than 15 amperes.
金泰
殷经理